Synthrotek ADAPT 4x2

The Synthrotek ADAPT series of modules use an original Synthrotek footprint design to take 3.5mm mono, RCA and banana jacks in any position! Mix and match to easily patch between different formats.

The 4x2 is a passive mult with two 1 to 4 mults or one 1 to 7 mult. There is a jumper on the back that, when bridged, will make the channel 2 input jack an output jack. If a 3.5mm jack is used for the channel 2 input and the jumper on back is NOT bridged, the channel 2 input will normal to channel 1. (An RCA or banana jack won't normal because they are not switched jacks).

This is a very simple kit to build, great for beginners!

Specifications:

• Current Draw: none
• Module width: 3HP
• Module Depth: 21mm

Please note: this includes the PCB and panel only. You will need to source the rest of the parts yourself.

3.5mm Mono Jack -> PJ301M-12

Banana Jack -> 108-0903-001

RCA Jack -> 502-3501FPX