ST Modular UIT (pcb+panel only)
Beschreibung
ST Modular UIT
4HP Balanced Output
UIT is a balanced output module taht supplies an active output on the cold terminal of the TRS jacks,
producing the same signal as the hot terminal but pahse-inverted. This allows stable driving of long cables
at low noise levels. It is based on high-performance, fully differential operational amplifiers and laser-trimmed
thin-film resistors that exhibit low noise and distorsion and a wide output swing.
This module offers two TRS 6.3mm jacks that provide the Balanced Output signaland a TRS 3.5mm
Headphone Output. Both have dedicated Volume potentiometers with +6dB gain.
Two LEDs indicate the level of both incoming signals. The left input is normalized to the right input if there is
no signal present. The outputs are protected against unwanted phantom power voltages.
There are also PCB outputs available if you want to solder case/ cabin mounted output jacks directly to the
UIT PCB.
UIT is suposed to be the last module in your modular chain and connects the modular world with any other
studio or stage input equipment.
Details:
•TRS Balanced Output
•Low Noise and Low Distortion
•Headphone Output
•Volume Control
•Phantom Power Protection
•PCB Outputs for Case Mounted Jacks
•Wrong polarity protection•3U Eurorack module, 4 HP wide
•Power consumption: 31 mA at +12 V and 25 mA at -12V
• Front PCB Panel
• Main PCB
• Control PCB
*** panel & pcb only, no further parts are included here !
*** just the bare pcb(s) without any parts ***
*** ***
Herstellerinformationen
post@3u-shop.de